Safety Inserts
To support pallets 600 x 800 mm (= half EURO pallet) and 800x1200mm (EURO pallet).
The spacers positioned in down-aisle direction are designed to provide support for unbound or damaged pallets.
The guard is not designed as a safety net to collect loose boxes or cartons that may fall from a pallet.
Mounted Safety Insert (Not Welded)
Load capacity
- Maximum load per kit = 1000 kg
Finish
To be used on box beams.
Safety Insert With Backstop (Welded)
Load Capacity
- 1400kg UDL - if the Half Pallets are supported also by the racking beams (half of the loads to be transmitted directly to the beams)
- 700kg UDL - if the Pallet is supported only by the Half Pallet Support.
- This Half Pallet Inserts have an angled back stopper to guide the pallet when placed over.
Finish
- The standard finish is RAL9002
To be used only for BX50 Beams.
L-hook Safety Insert (Welded)
Load Capacity
- 1400kg UDL - if the Half Pallets are supported also by the racking beams (half of the loads to be transmitted directly to the beams)
- 700kg UDL - if the Pallet is supported only by the Half Pallet Support.
- This Half Pallet Inserts have the front and back hooks "L" shaped.
Finish
- The standard finish is RAL9002
To be used only for BX50 Beams.
U-hook Safety Insert (Welded)
Load Capacity
- 1400kg UDL - if the Half Pallets are supported also by the racking beams (half of the loads to be transmitted directly to the beams)
- 700kg UDL - if the Pallet is supported only by the Half Pallet Support.
Finish
- The standard finish is RAL9002
This Half Pallet Inserts have the back hooks with a bended edge that follows the "I" profile of the beam for securing the Half Pallet Support against accidental lifting.